Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 12:04 pm


All times are UTC - 5 hours





Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 39 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Tue May 20, 2008 10:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Here we have a few sets of sinker redwood. I'll try to describe them to my best ability. If any defects, they will be marked and fall outside the pattern or in the rosette area. I will quote shipping by USPS. I will consider trades also.

These have real nice colors but hard to photograph....sorry.
Other stuff will follow soon too!

Thanks for looking! bliss

slightly off quarter towards the edges
8" x 24" $60 each (2 sets)
set 01 sold Neil
sold set 02 to Zach
Image
Image

small set for Parlour. 7.5" x 24"
slightly off quarter towards the edges
$50 each
set 31 sold to Ron!
set 21 sold to David W.
Image
Image

real nice sets!
7.75" x 20.5" $80 each (2 sets) both sold sold jtkirby
Image
Image


two more large sets with some interesting streaks
9.5" x 24" $80 each (2 sets) Both traded to Chris
Image
Image

very large sets
a bit of quarter but stiff
10" x 25" $70 each (4 sets)
70 and 74 sold to Jerry!
Image
Image
Image
Image

8.5" x 23" tight grain
$85 each (5 sets)
sold set 80 to Zach
set 81(2) sold to David W.
sets 82 and 84 sold to GregH
Image
Image
Image
Image
Image

very good gradient color
8" x 24" $85 each
set 90 sold jtkirby
Image


oppurtunity grade large sets
minor knots are present but these sets are still very usable
for ukes or smaller guitars or even larger if you don't mind the knots
or if you place the knots outside the pattern on in soundhole
$35 each or $100 for all!( 4 sets) all sold to Chris!
Image

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Last edited by peterm on Mon Jun 09, 2008 12:46 am, edited 19 times in total.

Top
 Profile  
 
PostPosted: Sun Jun 01, 2008 3:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Back and sides are in!!
I will consider trades also! duh

Very interesting "flame" Myrtle wood
Dread size $85 Sold to Steve W
Image

Curly Myrtle wood
Dread size $95 SOLD TERRY STOWELL
Image

Beautiful Satinwood
Dread Size $145 Sold to Joe
Image

Curly Red Oak
Dread size $45 Sold to Joe
Image

Pau Ferro
Dread Size $75 sold Neil
Image

Granadillo
Dread Size $95
Image

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Last edited by peterm on Sat Jun 07, 2008 8:25 am, edited 5 times in total.

Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 6:51 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
I want curly myrtle $95


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 6:51 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
I want curly myrtle $95

(oops, double post)


Last edited by Terry Stowell on Mon Jun 02, 2008 7:19 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 7:07 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
Hi Peter,

I'd like redwood tops 41, 42 and 90, please!

Jim

_________________
Jim Kirby
kirby@udel.edu


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 7:27 am 
Offline
Cocobolo
Cocobolo

Joined: Tue May 13, 2008 9:45 am
Posts: 258
Hi Peter

I'd like these, if you can ship them to Canada...


Sinker SWP 01 $60

Curly Myrtle $95

Thanks
Neil


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Terry,
its yours!

Thanks

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:35 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
jtkirby wrote:
Hi Peter,

I'd like redwood tops 41, 42 and 90, please!

Jim


got it!

Thanks

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:38 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
neogardguitar wrote:
Hi Peter

I'd like these, if you can ship them to Canada...


Sinker SWP 01 $60

Curly Myrtle $95

Thanks
Neil


Neil,
I can ship to Canada but the Myrtle is sold! someone got it first!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 8:46 am 
Offline
Cocobolo
Cocobolo

Joined: Tue May 13, 2008 9:45 am
Posts: 258
I'll still take the SWP 01 and the Pau Ferro if still available

Neil


Top
 Profile  
 
PostPosted: Mon Jun 02, 2008 9:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
neogardguitar wrote:
I'll still take the SWP 01 and the Pau Ferro if still available

Neil


go it!
Thanks a lot!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Tue Jun 03, 2008 9:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
I'll email everyone with shipping costs soon.
Thanks

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 12:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
Here we have Allied Lutherie truss rods. I have too many (double ordered!) so take advantage!
$18 each new and $13.75 for 12 or more new from Allied.

I have 18 available.
These are the new one with the micro adjustment feature. They are the best you can get!
By these at $12 for 6 or more, $10 for 12 or more or $14 each! ALL sold to fryovanni !


You do not have the required permissions to view the files attached to this post.

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Last edited by peterm on Mon Jun 09, 2008 1:00 am, edited 2 times in total.

Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 1:06 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 01, 2005 3:05 pm
Posts: 503
Location: Portland, Oregon
Peter,
I would like all the truss rods, if nobody else has claimed them.
Rich


Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 1:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
fryovanni wrote:
Peter,
I would like all the truss rods, if nobody else has claimed them.
Rich



YOu got my friend!! [:Y:]

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 8:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Apr 23, 2008 7:16 pm
Posts: 146
Will you take $150 for the satinwood and curly red oak together?

If so I would like them, please.




Joe


Top
 Profile  
 
PostPosted: Thu Jun 05, 2008 9:53 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
isirajo wrote:
Will you take $150 for the satinwood and curly red oak together?

If so I would like them, please.




Joe


Joe,
you got yourself a deal! Thanks

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 12:17 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Nov 16, 2007 6:06 am
Posts: 329
Uhh Man... That totally sucks! I wanted couple of those truss rods. Thanks alot RICH! pfft


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 12:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Apr 23, 2008 7:16 pm
Posts: 146
peterm wrote:
isirajo wrote:
Will you take $150 for the satinwood and curly red oak together?

If so I would like them, please.




Joe


Joe,
you got yourself a deal! Thanks



Thanks, Peter, I have sent you a PM

Joe


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:08 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 10, 2007 2:47 am
Posts: 781
Location: Wauwatosa, WI, USA
Sinker SWP 02 and SWP 80 for $110 shipped?


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
zehley wrote:
Sinker SWP 02 and SWP 80 for $110 shipped?


Zach, if you can pay $10 for shipping we have a deal!! :oops:

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jul 28, 2007 1:03 pm
Posts: 724
Location: NE Oklahoma, United States
First name: Steve
Last Name: Walden
City: Bartlesville
State: Oklahoma
Zip/Postal Code: 74006
Country: USA
Focus: Build
Status: Amateur
Peter – I will take this:
Very interesting "flame" Myrtle wood
Dread size $85

Do you have any more of the truss rods? If so, let me know haw many. I would take 12 of the micro adjust if you had them. I would consider a smaller #.

Thanks,

_________________
Steve Walden
Aspiring Builder,
Bartlesville, OK


Top
 Profile  
 
PostPosted: Fri Jun 06, 2008 7:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
WaldenWorx wrote:
Peter – I will take this:
Very interesting "flame" Myrtle wood
Dread size $85

Do you have any more of the truss rods? If so, let me know haw many. I would take 12 of the micro adjust if you had them. I would consider a smaller #.

Thanks,


Thanks a lot!
Unfortunately only I have a few left for the next scheduled guitars and after that I am switching to a different design.
If you need anything else let me know!

Thanks,
Peter

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
PostPosted: Sat Jun 07, 2008 1:23 pm 
Offline
Walnut
Walnut

Joined: Fri Jan 12, 2007 5:05 pm
Posts: 22
Location: Denver, Colorado
Hi Peter,
am interested in SWP 70 & 74 for $100

Thanks
Jerry


Top
 Profile  
 
PostPosted: Sat Jun 07, 2008 2:22 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
jerrym wrote:
Hi Peter,
am interested in SWP 70 & 74 for $100

Thanks
Jerry



70 & 74 are yours for $100

Thanks!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 39 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com